Connecting synth output to Angela Line-In // Volume Problem

Graham Langley founded Amek in 1973 with Nick Franks. Since then, AMEK and TAC recording consoles have been the choice of demanding audio professionals for over 25 years.

Moderator: Matt Syson

Connecting synth output to Angela Line-In // Volume Problem

Postby Frcake » Mon Jun 06, 2016 5:19 am

Hey guys,

When i try to connect my jupiter 6 to Angela's input from the jackfield , i get a very thin sound , and the line amp barely boosts when he's all up!

For some reason i hook up a TR-606 on another input and plays fine, but when i plug the jupiter(even in the same cable) it's really thin , no bass, no volume!

Also i had the same problem when i plugged an ELKA orghan , same thin low sound.

To be sure of the jupiters good working state, i hooked it up to a monitor alone and played fine, same output same cable etc...

Is there a problem with Angelas impedance?, And if this is not do-able, how do you go about recording a line signal from the control room?!
Frcake
Analog Enthusiast
 
Posts: 19
Joined: Thu Mar 03, 2016 6:40 am

Return to AMEK & TAC Recording Consoles

Who is online

Users browsing this forum: No registered users and 5 guests

cron
 
Mr Patchbay sells patchbays, tt/bantam cables and more