Matchless edac buss pin order

Graham Langley founded Amek in 1973 with Nick Franks. Since then, AMEK and TAC recording consoles have been the choice of demanding audio professionals for over 25 years.

Moderator: Matt Syson

Matchless edac buss pin order

Postby midifx » Sun Jan 29, 2017 7:27 pm

Hi friends..
I like to know if any. Can help me with info about the pin edac conector in recordr buses outs because is not conected to the conector and i dont know wich one is channel 1 2 3 ..... and where must be conected each channel in edac Elco connection...

Thank you..
Daniel Silva
Midi Studio FX
midifx
Analog Enthusiast
 
Posts: 6
Joined: Sat Nov 26, 2016 5:45 pm

Re: Matchless edac buss pin order

Postby buttley » Sun Feb 05, 2017 6:37 am

Hey Daniel,

try sending your slate Osc to the bus ouputs, one at a time,

this diagram shows the standard pin configurations for edacs, once you find one or two ouputs, it should be easy to figure the whole plug out.

best
buttley
Analog Owner
 
Posts: 4
Joined: Sat Mar 05, 2016 2:23 pm
Location: London UK


Return to AMEK & TAC Recording Consoles

Who is online

Users browsing this forum: No registered users and 3 guests

 
Mr Patchbay sells patchbays, tt/bantam cables and more