but as i won't have the space i thought, they'd be in use more than stocked waiting for an hypothetic future here.
so here they're !!!
there's a 24ch EMT MM40 and a lovely 8/2 Siemens Sitral M444
the EMT is composed of two frames linked, but that could be separated and run together with a multicore link (wich is now inside the desk).
the frame is loaded with
24x 411.7 mono mic/line modules
4x 416 group modules
4x 112 master modules
Aux master + monitor ...
stand, wooden sides and armrest
psu
+ 2 stereo input modules
+ 1 spare master module
+ 1 rack with 8 master send that could be used as an 8 bus out but that'd need a bit of work
+ all siemens 30 pin connectors needed to connect the desk
the Siemens Sitral is a standart M444 fully loaded and in beautifull shape,
the desk features:
6 mic line inputs with eqs + 2 line ins, 2 aux send pre post fader, direct out pre / post fader, passive faders, 2 bus,
those where the first siemens transistor console after the Vserie based on the V72 / V76 etc ...
it is loaded with:
6 V276a mic preamp
6 W295b equalizer
2 V275 summing amps
2 V294 output amps
2 V272 aux master outs
1 V282c 6 buffer amps for 6 direct outs pre / post fader
1 H280 oscillator
1 Vu meter
10 danner passive fader
........
if i'd part it over ebay i could get about 4k just for the modules, i don't count all xformers and rare tuchels inside the desk
i'll purvey it with
1 spare V282c
2 V274 distribution amps
all modules schematics
+ m444 leaflet with block diagram ...
i planned to restaure it but i haven't got the time to,
it need recap, calibration, a bit of switch cleaning (i've made the most part of it)
3 eqs have the mid band that doesn't work as it should because of bad caps, it is no big deal.
purveyed with siemens connectors too
i'm taking offers, eventually trades (mastering devices, studer 962 with 4 buss, wich i could move around...)
i'm not in a hurry,
those desk are quite unique sounding and rare
