Dixson Meter question

In the late 70's, over half of the records in Billboard's Top 200 were recorded and/or mixed using MCI equipment.

Moderator: brianroth

Dixson Meter question

Postby electrochronic » Sun Dec 25, 2011 12:15 am

The MCI Dixson labeled meters for the JH416A, B consoles seem to have a special rectifier installed.
Its a square looking rectifier that looks to be of special construction. I compared this MCI Dixson meter
to a identical Dixson meter without the MCI labeled scale and it has germanium rectifiers installed.

Is there a reason why both of these Model 330 Dixson meters have two entirely different rectifiers
installed. I suspect the MCI Dixson meter has a special low votage drop rectifier designed especially
to be placed directly in the audio path. It seems the Dixson meters with the Germanium diodes need to run with a buffer board , while the MCI Dixson do not require a buffer board. I suspect the germanium one run without a buffer board will introduce significant distortion to any audio signal run thru its circuit. It also apears the Non-MCI Dixson model 330 meter
is not a suitable plug in replacement meter without the special rectifier.

Can any MCI specialists confirm this.
electrochronic
Analog Enthusiast
 
Posts: 9
Joined: Fri Mar 06, 2009 1:32 pm

Return to MCI Recording Consoles

Who is online

Users browsing this forum: No registered users and 1 guest

 
Mr Patchbay sells patchbays, tt/bantam cables and more