DM 1748 (03) COMPRESSOR LIMITER PIN OUT ?

With a comprehensive range of mixing consoles, Calrec has been a manufacturer of high quality audio products since 1964.

Moderators: GJC Designs, Richard Lumb

DM 1748 (03) COMPRESSOR LIMITER PIN OUT ?

Postby angerstein » Sat Apr 28, 2012 10:19 am

hello,

i bought the comp controll-unit dm1748 (03) and two boards labelled -EN 1554- and EN 804-003-13.
(each board has both labels..)
in the auction it said it comes with the tech.docu

but well, the docu consists of a parts list which doesnt help me much.

i was hoping someone could tell me the pinouts for in out and the power rails,
so i could rack this baby :)

thanks and greetings from Vienna

gabriel angerstein
angerstein
Analog Owner
 
Posts: 3
Joined: Tue May 04, 2010 5:02 am

Re: DM 1748 (03) COMPRESSOR LIMITER PIN OUT ?

Postby DraytonTom » Fri May 11, 2012 2:25 pm

Hi Gabriel

The DM1748 is the control panel from the Calrec Assignable VCS console.
The assignable console had a digital control surface that sent and received digital control data to an analogue processing rack.
The 2 cards you mention are reader/latch cards for updating the LED displays and reading switch and encoder functions.
Unfortunately, the panel and the cards you have dont process any audio.
The corresponding audio card is the DF1724.

If you had some of the audio cards, you would still need to write software for a microcontroller to decode the panel data input/output and send the appropriate codes to the analogue card.

Hope this helps.

Tom
DraytonTom
VU Meter Specialist
 
Posts: 28
Joined: Fri Apr 16, 2010 1:36 pm


Return to Calrec Recording Consoles

Who is online

Users browsing this forum: No registered users and 2 guests

 
Mr Patchbay sells patchbays, tt/bantam cables and more