Module screws

Founded in 1973, Soundcraft first made its mark with the launch of the Series 1, the first mixing console in a flightcase.

Moderator: GJC Designs

Module screws

Postby mad » Sat Jan 19, 2008 6:28 pm

one simple question. I'm missing few screws on my console but I'm not sure what type I'm looking for. is that M3.5 or some British measure :?
mad
VU Meter Specialist
 
Posts: 40
Joined: Mon May 28, 2007 7:48 am
Location: Serbia-Belgrade

Postby GJC Designs » Sun Jan 20, 2008 12:00 am

The thread sizes used were M3.5 and M3, depending on the console type.
Gareth
GJC Designs
Yacht Rocker
 
Posts: 304
Joined: Fri Oct 13, 2006 12:39 pm
Location: West Yorkshire, UK.

Postby mad » Sun Jan 20, 2008 8:12 am

Sorry, I'm talking about Europa console. I tried with M3 what's common screw in my area but it's too small. M4 is too big, so I presume that's M3.5 (hard to find here). BTW, is the thread pitch standard European?
mad
VU Meter Specialist
 
Posts: 40
Joined: Mon May 28, 2007 7:48 am
Location: Serbia-Belgrade

Postby GJC Designs » Sun Jan 20, 2008 12:46 pm

It will be M3.5 and a standard European thread pitch.
Gareth
GJC Designs
Yacht Rocker
 
Posts: 304
Joined: Fri Oct 13, 2006 12:39 pm
Location: West Yorkshire, UK.

Postby mad » Sun Jan 20, 2008 1:30 pm

Thanks, that's great I will purchase a full box of :D
mad
VU Meter Specialist
 
Posts: 40
Joined: Mon May 28, 2007 7:48 am
Location: Serbia-Belgrade

Re: Module screws

Postby CustomRecording » Thu Oct 23, 2014 8:41 am

Has anyone found an online source for these screws? My 1624 came with no module screws at all. : (
CustomRecording
Analog Owner
 
Posts: 2
Joined: Mon Oct 20, 2014 4:11 pm

Re: Module screws

Postby Calgonstudio » Mon Oct 27, 2014 6:00 am

Calgonstudio
Analog Enthusiast
 
Posts: 13
Joined: Mon Sep 29, 2014 11:04 am


Return to Soundcraft Recording Consoles

Who is online

Users browsing this forum: No registered users and 2 guests

 
Mr Patchbay sells patchbays, tt/bantam cables and more