24 Channel 12 buss SC 500

Founded in 1973, Soundcraft first made its mark with the launch of the Series 1, the first mixing console in a flightcase.

Moderator: GJC Designs

24 Channel 12 buss SC 500

Postby Calgonstudio » Sat Oct 11, 2014 8:06 am

will this work, I have a spare frame that I was thinking of loading 24 single 500/600 channels, a master and 12 of the 500 buss channels. took me a while to think of how to write this ...if I make a ribbon cable that links the 1st 8 channels to the 1st set of 4 buss channels , bypassing the next 16 channels , then a ribbon the links the next 8(9-16) the next set of 4 busses. and repeat for the next set of 8 and 4 busses.....should be do able Right?
I understand that I would need to hook all 24 to the master section ...I'm not concerned with losing the ability to "buss multiple channels" IE 1-4 and then 9-14 on the same buss, I'm looking to have a greater control over send volume to a 24 track recorder...
Calgonstudio
Analog Enthusiast
 
Posts: 13
Joined: Mon Sep 29, 2014 11:04 am

Re: 24 Channel 12 buss SC 500

Postby ric3xrt » Tue Oct 14, 2014 5:08 pm

I have no answer for you, but keep us posted if you try it.
ric3xrt
Analog Enthusiast
 
Posts: 16
Joined: Sat Apr 05, 2014 4:43 pm

Re: 24 Channel 12 buss SC 500

Postby GJC Designs » Wed Oct 15, 2014 1:11 am

You must ensure that you have only one mix amp per bus. Follow this rule when making your ribbon cables and you plan should work.
Gareth
GJC Designs
Yacht Rocker
 
Posts: 304
Joined: Fri Oct 13, 2006 12:39 pm
Location: West Yorkshire, UK.


Return to Soundcraft Recording Consoles

Who is online

Users browsing this forum: No registered users and 1 guest

cron
 
Mr Patchbay sells patchbays, tt/bantam cables and more